Wacker Neuson ET65 - Control Elements

BA E14 track en* 1.3 * E14t_13_710.fm 7-65
Maintenance 7
Control elements
Regeneration push button
The push button A (ET65/404F-22T) is in the middle position and can be
pressed in either direction, but does not lock into place.
Push button B (ET90/TCD 2.9 DPF) can be pressed downward, but does
not engage.
The automatic regeneration mode is preset if the engine is stopped for
at least 30 seconds.
ET65/404F-22T
Push button functions:
1: deactivate/interrupt/reactivate regeneration (ET 65 Tier IV only)
2: automatic regeneration mode (middle position)
3: start manual regeneration
ET90/TCD 2.9 DPF
Push button functions:
4: Automatic regeneration mode
5: initiate/interrupt standstill regeneration
C: Parking brake switch for standstill regeneration ET90 DPF
Fig. 318
3
1
2
A
Fig. 319
5
4
B
Fig. 320
C