BA E14 track en* 1.3 * E14t_13_300.fm 3-3
Introduction 3
Cabin
The cabin has been specially designed for protection in case of an
accident.
• ROPS/TOPS tested cabin.
• Standard protective FOPS structure (category I) integrated in cabin
• Protective FOPS structure category II (option) for driver’ cabin;
Protective structure against falling objects.
• Front guard category II (option) for driver's cabin; Protective structure
to guard against objects from the front (e.g. pipes, tree roots).
Definition of FOPS/Front Guard categories
Category I (FOPS):
Protection against small falling (FOPS) objects (for example bricks, small
pieces of concrete, tools) for vehicles which are used for tasks such as
road repair, landscaping work and work on other construction sites.
Category II (FOPS/Front Guard):
Protection against heavy falling objects (FOPS) or heavy objects
penetrating into the cabin from the front (Front Guard), for example trees
or pieces of rock, for vehicles that are used for tasks such as clearance,
demolition and forestry work.
Superstructure Versions
ET: conventional superstructure
EZ: Zero tail revolving superstructure; the revolving superstructure does
not project over the width of the vehicle with an extended telescopic travel
gear without a rear weight when rotating.
Fig. 3 (symbolic representation)
To Next Page
Loading...
