Customizes the amount of pressure
needed to click, draw, or ink.
Displays the tip F
EEL DETAILS dialog
box where you can further
customize the tip sensitivity.
Press the pen tip on the tablet to test
the T
IP FEEL setting. Adjust the TIP
F
EEL so that you can comfortably
reach full pressure.
Adjusts the size of the double-click
area. Drag the slider to O
FF to
disable double-click assist
.
Hints:
• Use a soft T
IP FEEL to reach the full pressure range with a lighter touch.
• In some applications a soft pressure setting can make the pen overreact – any small press on the pen is
magnified on the screen. If you experience this, try a firmer T
IP FEEL setting.
• To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).
Note: A large double-click distance may cause a delay at the beginning of brush strokes in some drawing
applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice such
effects, try setting a smaller double-click distance or using the side switch to double-click (see using the side
switch). You can also set an ExpressKey to double-click.
To Next Page
Loading...
