46
46
Index
Contents
IndexContents
Function name Description
PRESSURE HOLD Locks the pressure at the current pressure level until the button is released.
For example, you can paint with pressure sensitivity until you reach the brush size
that you like. You can then press the button and continue painting with the same
size brush until the button is released.
P
RECISION MODE Changes the mapping around the current pen tip position such that you must move
the pen twice as far for the screen cursor to cover the same distance on the display
screen. To activate, press and hold the tool button to which this function is
assigned. Releasing the button returns to normal mapping.
When your tool is in M
OUSE mode, screen cursor movement is adjusted to act as if
acceleration were off and speed set to slow.
D
ISPLAY TOGGLE For multiple monitor systems. Enables you to toggle the current tablet mapping and
screen cursor between different displays when you press an ExpressKey that has
been assigned this function. See working with Display Toggle
.
S
HOW SETTINGS Displays a diagram of the tablet ExpressKeys and Touch Ring, showing the current
function settings for each control.
M
ODE TOGGLE... Toggles between PEN mode and MOUSE mode. When first setting a tool button to
M
ODE TOGGLE..., the MOUSE MODE dialog box is displayed where you can adjust the
mouse acceleration and speed.
Note: M
OUSE mode settings can be accessed from a number of different locations
within the control panel. However, for each input tool and application that you are
customizing, only one M
OUSE ACCELERATION and SPEED setting can be made.
D
ISABLED Disables the control function.
S
KIP Sets the Touch Ring toggle button to skip a function state that has been assigned
this option in the toggle sequence.
D
EFAULT Returns a control to its default setting.
Sets the screen cursor tracking
speed when in M
OUSE mode.
Sets the screen cursor acceleration
when in M
OUSE mode.
To Next Page
Loading...
Need help?
General
