156
PXM
Do not change the document or the safety relevant information without approval of the MACHINERY expert
Declaration of Incorporation
Powder center – PXM-ITA
Issued
PXM-ITA R0
04/05/2015
Approved
Mach Expert
sheet 1 of 2
H.B. S.a.s. di Luigi Volonte’ e C. – Via Carlo Porta, 13 - 23861 Cesana Brianza (LC)
DECLARATION OF INCORPORATION (Fac-Simile)
According to annex II.B of the European Directive 2006/42/EC relating to Machineries ad according to all
other applicable European Directives,
We:
H.B. S.a.s. di Luigi Volontè e C.
Via Carlo Porta,13 – 23861 – Cesana Brianza (LC) - ITALY
declare, as Manufacturers of the machinery in the scope of this declaration, that the following :
Model: Powder center
Type: PXM - ITA
Serial Number : FAC-SIMILE
Year of manufacturing : FAC_SIMILE
Are designed and manufactured according to the following European Directives:
- European Directive 2006/42/EC Safety of Machineries
- European Directive 2004/108/EC Electromagnetic compatibility
- European Directive 94/9/EC ATEX
- European Directive 2006/95/CE Low voltage
And aligned to the following harmonized standards:
European Directive 94/9/EC
EN 13463-1:2009 Non-electrical equipment for potentially explosive atmospheres — Part 1: Basic
method and requirements
European Directive 2006/42/EC
EN 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction (ISO 12100:2010)
EN 60204-1:2006
EN 12981 : 2005
+ A1 : 2009
European Directive
EN61439-1 : 2011
EN 60204-1:2006
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
Coating plants - Spray booths for applications of organic powder coating
material. Safety requirements
2006/95/CE
Low-voltage switchgear and control gear assemblies. General rules
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
European Directive 2004/108/EC
EN 61000-6-4:2006 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
for industrial environments
The electrical installation is also compliant with the following European Standard:
EN 60079-14: 2014 Explosive atmospheres -- Part 14: Electrical installations design, selection and
erection
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
To Next Page
Loading...
Need help?
General
