31
PXM
P_02571
P_02572
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
The powder center is delivered completely mounted to the site of installation. This may be
supplied separately for a version with its own lter suction.
Final assembly is performed on-site.
Transportation and warehouse operations may only be performed by quali ed personnel,
especially in the use of industrial trucks, ladders and cranes.
The selected means of transport must be suitable and permissible for the respective
component weights.
For the insertion of parts at the installation site, an opening width of at least 2,000 mm
(6.56 ft.) must exist, and an opening height of 2,000 mm (6.56 ft.).
The PXM powder center is delivered upright.
6.4 TRANSPORTATION
Parts have high weights and centers of gravity!
Risk of injury and damage to the device.
Only use appropriate lifting tackle (crane, fork lift) for assembly.
Secure the parts against tipping during transport.
Cordon o assembly area to keep out unauthorized persons.
WARNING
Support with wooden beams on the truck Loading/unloading with forklift
To Next Page
Loading...
Need help?
General
