4
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
Table of Contents
5.10 Displays on the Warning Lamp 28
5.11 User Rights 29
6 ASSEMBLY AND COMMISSIONING 30
6.1 Training the Assembly Sta 30
6.2 Storage Conditions 30
6.3 Installation Conditions 30
6.4 Transportation 31
6.5 Assembly and Installation 32
6.6 Grounding 37
6.7 Safety Checks 37
6.8 Commissioning 38
6.9 Standard Settings 39
6.9.1 Machine Parameters Operation 39
6.9.2 Machine Parameter Cleaning 40
6.9.3 CAN Addresses for MCM System 41
6.9.4 EPG S2 Settings 42
6.10 Function Test 44
7 OPERATION 46
7.1 Training the Operating Sta 46
7.2 Safety Instructions 46
7.3 Touch Screen Operation Standard Equipment 47
7.3.1 Equipment with Final Filter 47
7.3.2 Equipment with Integrated Exhaust System 48
7.4 Set Language 49
7.5 Logging a User On/O 50
7.6 Starting/Stopping Coating 51
7.6.1 Paint Change Components 52
7.6.2 Cleaning Positions Powder Hoses 53
7.7 Con guring the Powder Center 54
7.7.1 Settings 55
7.7.2 Machine Parameters Operation 56
7.7.3 Machine Parameter Cleaning 62
7.7.4 Machine Parameters Diagnosis 64
7.7.5 System 66
8 CLEANING AND MAINTENANCE 69
8.1 Cleaning 69
8.1.1 Cleaning Sta 69
8.1.2 Safety Instructions 69
8.2 Paint Change 70
8.2.1 Paint Change Components 70
8.2.2 Cleaning Positions Powder Hoses 71
8.2.3 Cleaning Functions 72
8.2.4 Cleaning Parameters 72
8.2.5 Start Cleaning (Example: Pro Tech M) 73
8.2.6 Cleaning/Paint Change on the PXM with Ultrasonic Sieve 82
8.3 Maintenance 85
8.3.1 Maintenance Sta 85
8.3.2 Safety Instructions 85
To Next Page
Loading...
Need help?
General
