Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
2 Correct Use
10 Order number 2333538 | Edition 03/2021
4 Check products for compatibility: see Chapter Materials of Paint-wetted Parts for Acidic
Hardeners [822]
Parts made of stainless steel 1.4404 are labeled with 1.4404 (see following example).
1 Design pressure of the fluid section 2 Description 1.4404
Further information about operation with acidic hardeners can be found in the operating
manual for the entire system.
2.6 MISUSE
Misuse can lead to physical injury and/or property damage! Special attention must be paid
that:
4 No dry coating products, e.g., powder are processed.
4 No food, medicine or cosmetics are processed. It is important to note that the device's
materials are not food-safe.
To Next Page
Loading...
Need help?
General
