WAGNER Leopard 35-70 - Protective and Monitoring Equipment

Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
5 Description
Order number 2333538 | Edition 03/2021 21
5.2.2 Fluid section
The fluid section (9) has been designed as a piston pump with exchangeable ball valves. The
hard chrome-plated pump piston runs in two fixed packings which are self-adjusting by
means of a pressure spring, thus resulting in a long service life.
Between the air motor (4) and the fluid section (9) there is a separating agent cup (7) for
holding the separating agent.
5.3 PROTECTIVE AND MONITORING EQUIPMENT
WARNING
Overpressure!
Danger to life from bursting device components.
4 Never change the safety valve setting.
The air motor is fitted with a safety valve. The safety valve has been set and sealed at the
factory. In case of pressures over and above the permissible operating pressure, the spring-
loaded valve, automatically opens and releases the excess pressure.
The control housing is equipped with noise insulation. Never operate the device without
noise insulation.
The connection set is equipped with a coupling cover. Never operate the device without a
coupling cover.
5.4 EXTENT OF DELIVERY
Piston pump consisting of:
- Fluid section
- Air motor
- Connection set for air motor - fluid section
- Air pressure regulator for air motor
The standard equipment includes:
Stk Order no. Designation
1 9992504 Separating agent 250 ml; 250 cc
1 2333537 Operating manual, in German
1 See Chapter EU Declaration of Con-
formity [8118]
Declaration of Conformity
1 See chapter Languages [86] Operating manual in the local lan-
guage
The delivery note shows the exact scope of delivery. Accessories: see Chapter Accessories
[867].
5.5 DATA
5.5.1 Materials of the parts transporting paint
Paint-wetted part Product
Housing Stainless steel
Piston Stainless steel and hard chrome
Valves balls Stainless steel