WAGNER Leopard 35-70 - Correct Use; Type of Use; For Use in Potentially Explosive Areas

Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
2 Correct Use
8 Order number 2333538 | Edition 03/2021
2 CORRECT USE
2.1 DEVICE TYPE
Pneumatic piston pump and its spray packs:
Wildcat Puma Leopard
10-70 28-40 35-70
18-40 21-110 35-150
-- -- 48-110
-- -- 26-200
2.1.1 Special Versions for Acidic Hardeners
Wildcat Leopard
10-70 (TC 1.4404) 35-70 (TC 1.4404)
2.2 TYPE OF USE
The device is suitable for processing liquid products like paints and lacquers:
– Non-ignitable products.
– Products in accordance with their classification in explosion class IIB.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
4 Use the device only to work with the materials recommended by WAGNER.
4 Do not deactivate safety fixtures.
4 Use only WAGNER original spare parts and accessories.
4 The operating personnel must be trained on the basis of this operating manual.
4 Follow the instructions in the operating manual.
2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The device can be employed in explosion hazard zones (Zone 1) (see Chapter Identification
[811]).
2.4 PROCESSIBLE WORKING MATERIALS
Fluid materials like paints and lacquers.
Application Wildcat
18-40
10-70
Puma
28-40
Puma
21-110
Leopard
35-70
Leopard
35-150
48-110
26-200
Water-dilutable products ↗ ↗ ↗ ↗ ↗
Solvent-based lacquers and paints ↗ ↗ ↗ ↗ ↗
Primers → → → ↗ ↗
Wax-based underside protection ↘ ↘ ↘ ↗ ↗
Chemically aggressive products that attack carbide
seats
↘ ↘ ↘ ↘ ↘
Version for acidic hardeners (only Wildcat 10-70 TC
1.4404 and Leopard 35-70 TC 1.4404)
↗ -- -- ↗ --