WAGNER Leopard 35-70 - Product Filter and Return Line

Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
5 Description
Order number 2333538 | Edition 03/2021 37
1
2
3
B_03907
1 Closed: working pressure in the air mo-
tor will be relieved (control pressure is
still present).
3 Open: working position
2 Closed: The air motor may still be un-
der pressure.
5.7 PRODUCT FILTER AND RETURN LINE
So that complete pressure relief of the pump can be performed (see Chapter Pressure Relief /
Work Interruption [849]), a high-pressure filter with a return line or a relief combination, is
mandatory.
5.7.1 High-pressure filter (Option)
To ensure problem-free operation it is recommended that a WAGNER high-pressure filter be
used. These have been developed especially for WAGNER pneumatic pumps.
The filter inserts can be exchanged depending on the product to be used.
The high-pressure filter, which corresponds to the device, can be found in Chapter
Accessories [867]. The compatible filter inserts can be found in Chapter Spare Parts
[880].
B_05272
Preferred filter installation position