WAGNER Leopard 35-70 - Page 77

Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
13 Accessories
Order number 2333538 | Edition 03/2021 77
Pos K Order no. Designation
Leopard
35-70 **
Leopard
35-150
Leopard
48-110
Leopard
26-200
A 2329479 2329484 2329490 2417044 Piston pump PE/TG
A 2329481 2329486 2329493 2417043 Piston pump PE/T
A -- -- 2329495 / Piston pump PE/L
1 ♦ 2324110 -- 2324110 Suction hose, DN16-SSt, complete
2 ♦ 2324116 Suction hose, DN25-SSt, complete
3 2325408 LP hose-fitting DN25-M36-SSt
4* ♦ 2323474 LP hose, DN25-PN10-EPDM (per meter)
5* ♦ 2323595 LP hose DN25-PN10-PE (per meter)
6 2325390 -- 2325390 LP hose-fitting DN16-M36-SSt
7* ♦ 2323329 -- 2323329 LP hose, DN16-PN10-EPDM (per meter)
8* ♦ 2323597 -- 2323597 LP hose DN16-PN10-PE (per meter)
9 2324158 -- 2324158 Suction tube DN16-SSt, complete
10 2323239 Suction tube DN25-SSt, complete
11 2324247 Suction elbow, DN25-SSt
12 2324238 Suction tube DN25-200L-SSt, complete
13 2315163 Bung adapter DN25-G2"
14 2324241 Suction tube DN25-30L-SSt, complete
15 ♦ 2323396 -- 2323396 Suction filter, DN16-18 mesh-SSt
16 ♦ 2323325 Suction filter, DN25-18mesh-SSt
17 2329688 -- Inlet valve with valve depressor
For details, see chapter Inlet Valve with Valve De-
pressor [8108]
♦ = wearing parts
-- = Item not available as a spare part
/ = Item does not exist
* Pos 4, 5, 7, 8: max. 10 bar
If a feed pump (>10 bar) is used, do not use downstream of the feed pump.
** The accesories listed for the product input are not suitable for the Leopard 35-70 TC
1.4404.