WAGNER PEM-C2 - 9 Supplement; Applicable Safety Regulations and List of Sources

PEM-C2
9. Supplement
9.1 Applicable safety regulations and list of sources
1) EN 50050
DIN VDE 0745
part 100
Electrostatic manual powder coating equipment
(published by
Beuth-Verlag,
Berlin)
EN 1953 Safety requirements governing spraying equipment
for coating systems
(published by
Beuth-Verlag,
Berlin)
2) EN 50053 – 2
DIN VDE 0745
part 200
Selection, installation and use of electrostatic
spraying equipment, manual electrostatic equipment
for powder
(published by
Beuth-Verlag,
Berlin)
3) ZH 1/443 Electrostatic powder coating with manual powder
coating equipment (Operating conditions)
(published by
C. Heymanns-
Verlag, Cologne)
4) EX-RL / ZH 1/10 Guidelines for explosion protection
(published by
C. Heymanns-
Verlag, Cologne)
5) VDE 0165 Installation of electrical equipment in explosion-
hazard areas
(published by
Beuth-Verlag,
Berlin)
EN 50014 Electrical equipment for explosion-hazard areas
(published by
Beuth-Verlag,
Berlin)
6) VDMA 24371
part 1
Guidelines for electrostatic coating using synthetic
resin powders
(published by
Beuth-Verlag,
Berlin)
7) ELEX V Regulation for electrical systems in
explosion-hazard areas
(published by
Beuth-Verlag,
Berlin)
8) VDE 0134 Instructions for first aid in case of accident
(published by
Beuth-Verlag,
Berlin)
9) VdS 2093 Association of insurance companies
(Riehlerstr. 36
50668 Cologne)
02/01 22 0351801