WAGNER PER-X1 - Corrugated Tubes; Retrofit Set Coronastar; D10-D12 Powder Coupling; Wedge Tool

Operating manual Robot powder spray gun PER-X1
12 Accessories
56 Order number 2444998 | Edition 10/2022
IMPORTANT: For both variants, always use powder tube D10-12 (order no. 2431552). Also
for the HC1 variants.
12.4 CORRUGATED TUBES
Order no. K Designation
2423435 Corrugated tube
2419989 Corrugated tube, divisible
12.5 RETROFIT SET CORONASTAR
P_01695
1
Order no. K Designation
2322868 CoronaStar, PEM-X1, complete
2322835 CoronaStar electrode, PEM-X1 ET
12.6 D10-D12 POWDER COUPLING
P_05426
Order no. K Designation
2438592 ⋆ D10-D12 Powder Coupling
⋆ Available as an accessory, not included in the scope of delivery
12.7 WEDGE TOOL
P_01696
Order no. K Designation
2324124 ⋆ Wedge tool, X1 + 20 wedges
⋆ Available as an accessory, not included in the scope of delivery