WAGNER PER-X1 - Identification; Explosion Protection Identification; Type Plate; Permissible Device Combinations

Operating manual Robot powder spray gun PER-X1
3 Identification
Order number 2444998 | Edition 10/2022 9
3 IDENTIFICATION
3.1 EXPLOSION PROTECTION IDENTIFICATION
As defined in Directive 2014/34/EU(ATEX), the device is suitable for use in potentially
explosive areas.
Device Type PER-X1 automatic gun
Manufacturer Wagner International AG
9450 Altstätten
Switzerland
0102 II2 D2mJ
CE European Communities
0102 Notified body: PTB
Ex Symbol for explosion protection
II Device class II
2 Category 2
D Ex-atmosphere dust
2mJ Maximum ignition energy 2 mJ
3.2 TYPE PLATE
P_04901
PER-X1
Serial Number:
PTB 22 ATEX 5001
EN 50050-2 / EN 50177
Wagner International AG, CH-9450 Altstätten
Made in Switzerland
0102
II 2 D 2mJ
3.3 PERMISSIBLE DEVICE COMBINATIONS
WARNING
Incorrect use!
Risk of injury and damage to the device.
4 Only connect the powder spray gun to original WAGNER devices.
The PER-X1 robot powder spray gun may only be used with the following control units:
Guns Control units
PER-X1 (with accessories) EPG-Sprint X