WAGNER TwinControl 5-60 ABS - Touching Hot Surfaces; Correct Use; Field of Application; Systems with Turbine

10
TwinControl .
OPERATING MANUAL
EDITION 04/2010 PART NO. DOC393831
2.2.6 TOUCHING HOT SURFACES
 4OUCHHOTSURFACESONLYIFYOUAREWEARINGPROTECTIVEGLOVES
 7HENOPERATINGTHEUNITWITHACOATINGMATERIALWITHATEMPERATUREOF²#²&
 )DENTIFYTHEUNITWITHAWARNINGLABELTHATSAYSu7ARNINGHOTSURFACEh
/RDER.O
 )NFORMATIONLABEL
 3AFETYLABEL
2.3 CORRECT USE
2.4 FIELD OF APPLICATION
7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE
 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2
 /PERATETHEUNITONLYASANENTIREUNIT
 $ONOTDEACTIVATESAFETYEQUIPMENT
 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES
2.4.1 SYSTEMS WITH TURBINE
The system with turbine complies with Explosion Protection Directive 94/9/EC (Atex) and
can be used as a Category 2 device in Ex Zone 1.
It is designed with ignition protection type „Intrinsic safety“ and has the marking
0102
II 2G Ex ia II B T4 X.
2.4.2 SYSTEMS WITH MAINS SUPPLY
The system with mains supply must not be operated in potentially explosive areas (Zone
0, 1, 2).