14
TwinControl .
OPERATING MANUAL
EDITION 04/2010
PART NO. DOC393831
4 DESCRIPTION
4.1 FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS
The TwinControl basic unit comprises 5 functional units: the pneumatically operated high-pressure pumps for
A and B components and for solvents, the mixing unit and the control unit. The two material components are
brought to high pressure by the pumps and intermixed in an adjustable, predefi ned mixing ratio in the static
mixer, from where it is conveyed to the gun. The system can be operated with one or more guns, depending
on size and output. Various functions are controlled by the electronics in the control unit, such as: fl ushing, ap-
plication life monitoring, mixing ratio, cutout in the event of line breakage. The application range is described
in chapters 2.4.1 and 2.4.2, and the intended use is explained in 2.3.
4.1.1 PROCESSIBLE MATERIALS
CAUTION
Impurities in the spraying system!
Spray gun blockage, materials harden in the spraying system
Flush the spray gun and paint supply with a suitable cleaning agent.
SIHI_0001_GB
Low-viscosity to high-viscosity two-component paints (e.g. epoxy, PU, DD) with an applica-
tion life of more than 5 minutes.
4.2 SCOPE OF DELIVERY
TwinControl basic units consist of the following materials
- Pneumatic pump with path measurement for A component
- Pneumatic pump with path measurement for B component
- Pneumatic pump for solvent (editions without also possible)
- Control unit (turbine or cable connection)
- Base frame or trolley or wall holder
- Static mixing unit
- Diverse material valves.
To the scope of delivery belong also
Separating fl uid 250 ml; 250 cc Part No. 9992504
Tool set PP3000 Part No. 367840
CE-Conformity Part No. see chapter 3.3.1 or 3.3.2
Operating manual German Part No. 393830
Operating manual in the local language Part No. see chapter 1
Compact Disc TwinControl (CD) Part No. 2307255
Reference sheet Transport Part No. 2305117
Pneumatic scheme TwinControl Part No. 393901
The delivery note shows the exact scope of delivery.
Accessories see chapter 10.
To Next Page
Loading...
