EasyManua.ls Logo

WAGNER TwinControl 5-60 ABS - Technical Data

WAGNER TwinControl 5-60 ABS
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
TwinControl .
OPERATING MANUAL
EDITION 04/2010 PART NO. DOC393831
4.3.2 TECHNICAL DATA
SIHI_0023_GB
WARNING
Outgoing air containing oil!
Risk of poisoning if inhaled
Provide water-free and oil-free compressed air (quality standard
5.5.4 as per ISO 8573.1) 5.5.4 = 40 µm / +7 / 5 mg/m³.
Description Units
5-60 ABS
18-40 ABS
28-40 ABS
35-70 ABS
35-150/70 ABS
48-110 ABS
75-150 ABS
72-300/150 ABS
72-300 ABS
Inlet air pressure min. MPa; bar; psi 0.6; 6; 87
Inlet air pressure maxi. MPa; bar; psi 0.8; 8; 116
Maxi. permissible number of strokes by
pumps in two-component operation
DS/ min 30
Maxi. material pressure in mixer MPa
bar;
psi
4
40
580
14.4
144
2089
22.4
224
3249
25.0
250
3626
37.0
370
5366
53.0
530
7687
Maxi. Material pressure at inlet MPa; bar; psi 0.8; 8; 116
Material outlet connection Zoll; Inch G1/4 NPSM 1/4" NPSM 3/8"
Air inlet connection Zoll; Inch G 1/2" G 1"
Material fl ow quantity of the mixing ratio 1:1 l/ min 3.6 2.4 4.2 6.6 9.0 13.5 18.0
Material fl ow quantity of the mixing ratio 4:1 l/ min 2.3 1.5 2.6 5.0 4.1 5.6 10.1 11.2
Material fl ow qty of the mixing ratio 10:1 l/ min 2.0 1.3 2.3 4.7 3.6 4.9 9.5 9.9
Material fl ow qty of the mixing ratio 20:1 l/ min 1.9 1.2 2.2 4.6 3.7 -
pH range of the material pH 3.5-9
Material Temperature °C; °F +5 – +60; +41 - +140
Ambient temperature °C; °F +5 – +40; +41 - +104
A/B mixing ratio volume 0.1:1 – 20:1 0,1:1 – 10:1
Ratio precision % ± 2
Sound pressure level at maxi. permissible air
pressure
*
See operating manuals pumps and valves
Control units TwinControl with able connection
Input voltage VAC 85 - 250
Input power W maxi. 40
Input frequency Hz 47-440
Control units TwinControl with turbine
Compressed air input maxi. MPa; bar; psi 0.5; 5; 73
Nominal air consumption NL/min 125
Air pressure quality free of oil and water
(Quality standard 5.5.4 according ISO 8573.1)
5.5.4 = 40 μm/ +7/ 5 mg/m
3

Table of Contents

Related product manuals