20
TwinControl .
OPERATING MANUAL
EDITION 04/2010 PART NO. DOC393831
11. If the complete TwinControl system is operated as part of a water varnish coating
system connected to high voltage, the green-yellow earth cables must be removed
and replaced with black cables with the same cross-section. Earthing symbols must be
made unrecognizable.
12. The device does not comply with chap. 6.3.12 of DIN EN 60079-11: 2007-08.
13. The device is suitable for over voltage Category II and may only be operated if all
connections are inserted or provided with protective caps. Degree of Pollution 3 for
the environment is then permissible.
Permissible storage temperature: -40
°
C; 104
°
F ... +80
°
C; +176
°
F.
Relative humidity (no bedewing) < 95%.
To Next Page
Loading...
