For Email Setting, please follow the below parameters:
Sender: your email address
Smtp Server: such as smtp.mail.yahoo.com etc.
Smtp port: 465
SSL: SSL
User name: your email address, the same with
sender
Password: your email password, if you are using
Yahoo and Gmail, please generate an app
password, and using the app password. Check the
FAQ document on website to generate app
password.
Receiver: any email address
After you fill in the chart of the email setting
page, please Save and Test E-Mail.
Save Picture to FTP: When an alarm is detected, the camera will send pictures to your
FTP server. Click on FTP Setting to setup FTP.
Save Record to FTP: When an alarm is detected, the camera will send a video to your
FTP server.
For FTP paramters, please refer to Page 40
Save Picture to SD/TF: When an alarm is detected, the camera will send pictures to the
SD card.
Save Record to SD/TF: When an alarm is detected, the camera will save an video to the
SD card.
Trigger IO Output: Not available for K2/K3.
Preset Linkage: When an alarm is detected, the camera will focus on one of the 8 Preset
spots (see above).
Speaker Linkage: When an alarm is detected the speaker will act as a siren for the
chosen length (5-30sec).
To Next Page
Loading...
