5.1 Settings
To view your camera in any web browser you’ll need the camera’s IP address and
camera’s Port.
If your computer is in the same network, just type the address in browser address bar:
http://IP:PORT for example http://113.116.100.223:80. Users can get these data from the
app > advanced settings > about camera.
If your computer is located outside the network where the camera is installed, users need
to input manually the camera’s IP in the router in the Port Forwarding Section (please
consult your router user guide or search on line) to view the camera.
5.1.1 Plugin installation
The Camera has 2 view mode:
View Mode 1 supported by an OCX Plugin (HYPlayer.exe)
View Mode 2 supported by an Adobe Flash Player Plugin
To Next Page
Loading...
