Water Process Solutions Encore 700 - Technical Data Overview; Material Identification and Composition; Pump Capacity Specifications; Pump Compatibility with Liquids

ENCORE
®
700 METERING PUMP
Technical Data
The overall technical characteristics of the Encore® 700 Series Metering
Pumps are listed in Table 1.1.
Material Identification/Composition
The chemical composition of materials used in the manufacture of the
metering pump is listed in Table 1.2.
Pump Capacity
The pump capacity for the direct and pulley drive configurations are
listed in Table 1.3.
Pump Compatibility
The compatibility of the metering pump with various liquid materials are
listed on Dwg. 440.050.190.010A-F, located at the end of this section.
The table identifies the various materials that can enter and come into
contact with component materials in the wetted end of the pump and
their effects on pump performance.
WT.440.400.001.UA.IM.1012
2