ENCORE
®
700 METERING PUMP
VERY IMPORTANT SAFETY PRECAUTIONS (CONT'D)
DO NOT RUN THE PUMP WITH THE BELT GUARD REMOVED.
USE ONLY WPS LISTED PARTS EXCEPT FOR COMMERCIALLY AVAILABLE PARTS WHICH
ARE IDENTIFIED
BY COMPLETE DESCRIPTION ON PARTS LIST. THE USE OF UNLISTED PARTS CAN RESULT IN EQUIPMENT
MALFUNCTIONS HAVING HAZARDOUS CONSEQUENCES.
THIS EQUIPMENT SHOULD BE INSTALLED, OPERATED AND SERVICED ONLY BY TRAINED, QUALIFIED PER-
SONNEL WHO ARE THOROUGHLY FAMILIAR WITH THE ENTIRE CONTENTS OF THE INSTRUCTION MANUAL.
DO NOT DISCARD THIS INSTRUCTION MANUAL UPON COMPLETION OF INSTALLATION. INFORMATION
PROVIDED IS ESSENTIAL FOR PROPER AND SAFE OPERATION AND MAINTENANCE.
ADDITIONAL OR REPLACEMENT COPIES OF THIS INSTRUCTION MANUAL ARE AVAILABLE FROM:
Water Process Solutions
Unit 10 Mill Hall Business Estate
Aylesford, Kent, ME20 7JZ
Phone: +44(0) 1622719945
Email: enquires@waterprocesssolutions.com
NOTE
Minor part number changes may be incorporated into WPS products from time to time that are not
immediately reflected in this instruction manual. If such a change apparently has been
made in your
equipment and does not appear to be reflected in your instruction manual, contact your local WPS
sales office for information.
Please include the equipment serial number in all correspondence. It is essential for effective com-
munication and proper equipment identification.
IWT.440.400.001.UA.IM.1012
SP-3
To Next Page
Loading...