Watson-Marlow 720DuN User Manual 33
Head and tube
If Head and tube is selected, the pump displays a list of standard pumpheads
that can be fitted to the pump.
Use the UP and DOWN keys to make a selection. Press ENTER to confirm. An
example is shown here.
The pump displays tube sizes, as below.
Tube
If Tube is selected or a pumphead choice has just been made, the pump dis-
plays a list of standard tube sizes that can be used in the pumphead previously
identified.
Use the UP and DOWN keys to make a selection. Press ENTER to confirm.
To Next Page
Loading...
Need help?
General
