Watson-Marlow 720DuN User Manual 36
18 Setup
Entry to the Setup menu is from the Main menu and can be limited to users who
correctly enter a three-digit security code. If a security code has been set, selecting
Setup and confirming with the ENTER key causes the pump to display the Security
code entry sequence. See 18.22 Security code. If no security code has been set, the
pump displays the first of seven screens containing the Setup menu.
The Setup menu
Make a selection using the UP or DOWN keys and press ENTER to confirm your
choice.
The Setup menu occu-
pies seven screens. The
first two are shown
here.
To move from one
screen to subsequent
screens, repeatedly
press DOWN. Each item
is highlighted in turn until the last item on the screen is highlighted.
A further press on the DOWN key displays the next screen of the
menu, with the first item highlighted.
Follow the reverse procedure using the UP key to move to an item on
a previous screen of the menu.
To Next Page
Loading...
Need help?
General
