Watson-Marlow 720DuN User Manual 53
18.16 Date and time
The pump’s real-time clock can be set with the date and time.
In the fifth screen of the Setup menu select Date/time using the UP and
DOWN keys. Press ENTER to confirm your choice. The pump displays any pre-
vious setting.
If the setting displayed is correct, press ENTER. The pump redisplays the fifth
screen of the Setup menu.
If you wish to change the setting, use the UP and DOWN keys to enter the
current date (two digits), month (three letters), year (four digits), hour, minute
and second (all two digits), pressing ENTER to confirm each one.
When ENTER is pressed to confirm the seconds, the pump redisplays the fifth
screen of the Setup menu.
18.17 Backlight
The pump’s display can be illuminated or not according to choice.
In the fifth screen of the Setup menu select Backlight using the UP and
DOWN keys. Press ENTER to confirm your choice.
The pump displays a screen allowing the user to switch the display backlight on
or off. Use the UP and DOWN keys to choose On or Off and press ENTER to
confirm the decision.
The pump returns the user to the fifth screen of the Setup menu. The display is
now illuminated or not according to the user’s decision.
Alternatively ...
To turn the backlight off: press STOP and DOWN together.
To turn the backlight on: press STOP and UP together.
To Next Page
Loading...
Need help?
General
