Waves MaxxBCL User Manual

Unpacking the Waves MaxxBCL
After unpacking the MaxxBCL unit, please check it carefully for any damage.
If any damage is found, immediately notify the carrier that brought you the
package. You, the consignee, must instigate any claim. Please retain all
packaging in case of future re-shipment.
Mounting the MaxxBCL
Before connecting MaxxBCL, be sure to securely mount it in a standard 19”
studio rack-mount away from heat and moisture. We recommend using
the supplied plastic washers between MaxxBCL and the mounting bolts to
protect MaxxBCL’s front panel from scratches. Alternatively, for desktop use,
attach the four rubber feet to the bottom of the MaxxBCL.
1.
T h e P r o f e s s i o n a l S t a n d a r d
maxxBclManualFinal.indd 1 5/1/05 12:47:17 AM

Waves MaxxBCL Specifications

General

Brand	Waves
Model	MaxxBCL
Category	Computer Hardware
Language	English

Summary

Safety and Power Supply Information

Voltage Selection Procedure

Instructions for setting the correct voltage for the MaxxBCL power supply.

Important Safety Considerations

Unpacking the MaxxBCL

Mounting the MaxxBCL

Guidance on securely mounting the MaxxBCL in a rack or for desktop use.

Rear Panel Overview

Connecting the MaxxBCL

Main Power Supply Setup

Instructions for connecting the MaxxBCL to the power source.

Fuse Replacement Guide

Audio Connections

Analog Input/Output Details

Digital Input/Output Details

Input/Output Calibration

Input Calibration Procedure

Steps to calibrate the input signal levels for optimal performance.

Output Calibration Procedure

Steps to calibrate the output signal levels for optimal performance.

Sync and Word Clock Connections

Synchronization Setup Guide

Compressor Modes and ARC™ Technology

MaxxBass™ Enhancement

MaxxBass™ Functionality

Details the working principle and effects of the MaxxBass™ feature.

L2 Limiter and Maximizer

L2 Limiter Operation

Explains the L2 Ultramaximizer's function for limiting and maximizing audio levels.

IDR™ and Resolution Management

Front Panel Controls

Sample Rate, Input, and Sync Settings

Quantize and Preset Management

Input Controls and Metering

Input Trim and Metering

Compressor Section Controls

Compressor Bypass and Modes

How to bypass the compressor and switch between Opto and Electro modes.

Ratio and Threshold Settings

Configuring the compression ratio and threshold levels.

Compressor Chain Order and Attack

MaxxBass™ Controls

MaxxBass™ Bypass and HPF

How to bypass MaxxBass™ and use the High Pass Filter.

Frequency and Intensity Adjustment

Configuring MaxxBass™ cutoff frequency and harmonic intensity.

Limiter Section Controls

Limiter Bypass and Linking

How to bypass the limiter and link threshold and output ceiling.

Limiter Threshold and Ceiling Settings

Configuring the limiter's threshold and output ceiling.

Examples of Applications

Sound Reinforcement Applications

Technical Specifications

ADC and DAC Performance Specs

Front Panel Control Details

Dedicated Buttons and Rotary Controls

Back Panel and Troubleshooting

Troubleshooting Common Issues

Addresses common problems like clicks and pops and sync issues.

Contacting Waves Support