EN
Return to home noti-
cation
A reminder to return to the shore when the battery level
is low. Please return to the shore immediately.
Propulsion system
blocked
Please check the propeller of the propulsion system. If
unwanted objects are entangled in it, clean up while in
power-off status, and restart to check whether it functions
normally again.
The accelerator does
not return to the zero
point
Do not use the accelerator on the remote controller with
power on. If the problem persists, calibrate the remote
controller again as instructed in the User Manual.
Lifetime maintenance
reminder for the pro-
pulsion system
Please connect the app to check the service life of the
sealing of the propulsion system. If the service life reach-
es the limit, consult the after-sales technical support, and
maintain and repair the propulsor as instructed.
Cycle life reminder of
the battery
Please connect the app to check the cycle life of the bat-
tery. If the cycle life reaches the limit, please replace the
battery.
Battery overheating
warning
When a too high temperature level is detected on the
battery, the board will automatically limit the output
power and resume to normal operations after the battery
temperature is restored to a normal level.
ECU communication
warning
Equipment communication error. If the problem persists,
please take note of the error code and consult after-sales
technical support.
ESC error warning
Driver error warning. The equipment will automatically
limit the output power and the error will be resolved au-
tomatically. If the problem persists, please take note of
the error code and consult after-sales technical support.
BMS warning
When excess current is detected on the battery, the
board will limit the output power automatically. Please
decelerate proactively and continue to use the board
when the error disappears.
Motor Test
Motor Lock
Motor idling
Please do not pull the trigger if the board is not in water.
The motor will stop spinning for a while and resume au-
tomatically. Use the board in water when the error disap-
pears.
BMS error
Please return to the shore immediately and take note of
the error code and consult after-sales technical support.
ESC error
Please return to the shore immediately and take note of
the error code and consult after-sales technical support.
To Next Page
Loading...