17
To add a new entry to the list (max. 80 entries), enter the RFID tag of the desired RFID media in the text field. Use a colon as a separator
between each RFID media. Example: "AA3E4F16:FE46E313"
To remove an entry from the list, delete the complete list. Afterwards, enter all media which should remain in the list again. It is not
possible to delete individual entries.
NOTE
The supplied RFID media are entered in the OCPP
whitelist. These numbers can be checked if necessary.
Compare the serial number of the key fob (printed on
the back) with the number on the packaging. The fol-
lowing combination of letters and numbers is the rele-
vant number of the RFID media. Example:
00000012:AA3E416B2D35381
To Next Page
Loading...
