24
11.3 System Information
The "System information" provides you with information about the software versions of the individual system components. You may be
required to provide Support with this information for a better diagnosis if there is an error.
11.4 Firmware update
To update the firmware of the charging station to the latest version, please proceed as follows:
NOTE
Before installing the update, make sure that there is no
charging process running and the charging station is in
stand-by mode.
1. Download the current firmware version onto your PC under https://webasto-charging.com/default/documentation/.
2. Click on the "Select file (.deb)" button in the configuration interface
3. Navigate to the storage location of the downloaded firmware and select it.
4. Make sure that you have selected the correct firmware version.
5. Click on the "Upload & Install" button.
6. The firmware update is executed. You receive continuous information about the progress of the update as messages on the inter-
face.
NOTE
Do not interrupt the power supply to the charging sta-
tion during the update under any circumstances. The
charging station restarts several times during the up-
date process.
7. After the update has been successfully installed, the "Firmware update successful" message appears on the web interface. You can
now use the charging station again.
NOTE
Webasto makes new software versions available on the
Webasto website at regular intervals. Webasto Connec-
tivity Service customers automatically have the latest
version of the software transferred to their charging
station.
To Next Page
Loading...
