EasyManua.ls Logo

Webasto Live - Configuration Checklists; Power Configuration Checklist; Authorization Configuration Checklist; System Configuration Checklist

Webasto Live
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Term Meaning Description Reference in chapter
SSL "Secure Sockets Layer" Encryption protocol 8.2 on page 14
TCP "Transmission Control Protocol" Data transmission protocol in the Internet 8.2 on page 14
URL "Uniform Resource Locator" Notation form of a network address 8 on page 14
USB "Universal serial bus" Data interface 2.6 on page 5
UTC "Universal time coordinated" Global time standard 11.1 on page 23
WiFi Alternative identifier created for WLAN 5 on page 10
WLAN "Wireless local area network" Wireless network 2.7 on page 6
13.3 Check list for configuring a charging station Webasto Live
1. Power:
Installation – Operator Current Limit (9.1.)
Installation – Power source voltage (9.1)
Installation – Phases connected to the Charge Point (9.1)
Installation – Phase rotation of the Charge Point (9.1
2. Authorization:
Free Charging – Free Charging (8.1)
RFID Whitelists – Enable OCPP Whitelists (8.4)
RFID Whitelists – List of Entries in OCPP Whitelists (8.4)
3. System:
Password – Factory Reset by RFID (10.1)
Password – Charging station Password (10.2)
4. Network:
LAN / WLAN (6.3 / 6.4)
Configuration Hotspot – Hotspot enabled (6.5)
Configuration Hotspot – Encryption (6.5)
Configuration Hotspot – Hotspot password (6.5)
The initial installation process is now complete. Your Webasto Live can be used for charging electric vehicles. Additional functions for
operating the charging station are described in these configuration instructions.

Table of Contents

Other manuals for Webasto Live

Related product manuals