WEG CFW11 - About the Manual

ABOUT THE MANUAL
ABOUT THE MANUAL
This manual supplies the necessary information for the operation of the CFW11 frequency inverter using the EtherCAT
protocol. This manual must be used together with the CFW11 user’s manual and programming manual.
✓
NOTE!
To use the EtherCAT accessory for CFW11 frequency inverter, it is necessary to use the special
version 5.5X. This version was designed based on standard version 5.10.
During power on, due to the initialization time required for EtherCAT interface, the CFW11 frequency
inverter may be momentarily unresponsive, and a loss of communication message may be displayed
on the keypad.
CFW11 | 5