Information About the Manual
SSW-06 | 5
INFORMATION ABOUT THE MANUAL
This Manual provides all information required for the Soft-Starter SSW-06 operation on network, using the
optional communication board for the Profibus DP, DeviceNet, EtherNet/IP and PROFINET. In this section are
discussed following subjects:
■ Description of the communication kit.
■ Soft-Starter SSW-06 characteristics on Fieldbus network.
■ Soft-Starter SSW-06 Parameter setting.
■ Soft-Starter operation via Fieldbus interface.
■ Errors and possible causes.
This Manual must be used joint the Soft-Starter SSW-06 Operation Manual.
FIELDBUS NETWORKS
“Fieldbus” is a generic term used for describing a digital communication system interconnecting several field
installed equipments, such as sensors, actuators and controllers. The Fieldbus network operates as a local
communication network.
Currently are used different types of protocols for the communication between field installed equipments,
inclusive Profibus DP, DeviceNet, EtherNet/IP and PROFINET protocols. In this section, where the use of the
communication board for Profibus DP, DeviceNet, EtherNet/IP and PROFINET protocols is described, the term
Fieldbus is used to designate generically these protocols.
ABBREVIATIONS AND DEFINITIONS
CAN Controller Area Network
DP-V0 Decentralized Periphery Version 0
DP-V1 Decentralized Periphery Version 1
I/O Input / Output
ODVA Open DeviceNet Vendor Association
CLP Programmable Logic Controller
HMI Human-Machine-Interface
NUMERICAL PRESENTATION
■ Decimal numbers are represented by means of digits without suffix.
■ Hexadecimal numbers are represented through the letter ’h’ after the number.
To Next Page
Loading...
Need help?
General
