Cleaning and maintenance
122 1449820000/1.4/04.17
6.1.4 Executing a nozzle check
If the print quality is not OK, there might be a blocked or dried out nozzle. To see if this is the case, execute
a nozzle check.
1 Touch the [TOOLS] button in the main menu.
2 Touch the [NOZZLE CHECK] button in the Tools menu.
The following window appears:
Figure 141 Touch panel – selecting a MultiCard for a nozzle check
3 Select a MultiCard for the nozzle check by touching the respective MultiCard, e.g. [CC 30 / 60 MC WS].
4 Touch the [NEXT] button.
To Next Page
Loading...