Weidmüller PrintJet ADVANCED - 6.9 Replacing the Cleaning Fluid Bottle

Cleaning and maintenance
1449820000/1.4/04.17 139
Figure 176 Locking the service cover
17 Insert a flat-blade screwdriver in the lock (A) and
lock the service cover (B).
18 Reconnect the printer to the grid (see section
“4.7 Connecting the power plug”).
19 Turn the printer back on (see section
“4.9 Turning the printer on/off”).
6.9 Replacing the cleaning fluid
bottle
Replace cleaning fluid bottle (PrintJet Cleaner
100ML, part number 25182100000) if it is empty.
Figure 177 Removing the hood
1 Detach the hood (A) over the cleaning fluid
bottle (B).
Figure 178 Unscrewing the bottle out of the top
2 Unscrew the empty bottle (A) out of the top.
Figure 179 Screwing the bottle into the top
3 Screw a full cleaning fluid bottle into the top.