Printer description
24 1449820000/1.4/04.17
3.2 MultiCards and MetalliCards
MultiCards made from plastic and MetalliCards made from aluminum or stainless steel can be printed with
the PrintJet ADVANCED printer.
The marking system, consisting of the PrintJet ADVANCED printer and the M-Print® PRO software, has
been designed by Weidmüller for MultiCards or MetalliCards.
Figure 6 MultiCards/MetalliCard
A Example: MultiCard
B Example: Half MultiCard
C Example: MetalliCard
D Example: Inlay for MetalliCards
The MultiCards can be inserted individually or in stacks. MetalliCards should only be inserted individually.
To Next Page
Loading...