Need help?Do you have a question about the WEIHONG ELECTRONIC NcStudio V10 CCD System and is the answer not in the manual?
General| Brand | WEIHONG ELECTRONIC |
|---|---|
| Model | NcStudio V10 CCD System |
| Category | Control Systems |
| Language | English |
Guides through the initial setup process for the NcStudio V10 CCD System.
Details the wiring and IO ports of the Lambda 3S controller for the NcStudio V10 CCD System.
Provides dimensions of the camera required for installation.
Details the dimensions of the camera lens for proper installation.
Lists the products needed for connecting the camera and its accessories.
Provides step-by-step instructions for connecting the camera and lens.
Guides through installing camera software, driver setup, and network configuration.
Explains how to configure a static IP address for the camera.
Outlines the process of adjusting and commissioning the camera for machining operations.
Explains how to configure various parameters related to the CCD system.
Lists the essential prerequisites before starting automatic toolpath execution.
Provides step-by-step instructions for running the toolpath in Auto mode.
To Next Page