EasyManua.ls Logo

Weinmann MEDUMAT Standard - User Manual

Default Icon
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MEDUMAT Standard
Ventilator
Description and instructions for use

Table of Contents

Questions and Answers

  • C
    catherine20Jul 30, 2025
    What to do if the Weinmann Fan shows < 2,7 bar alarm (oxygen pressure too low)?
    • N
      Nichole CollinsJul 30, 2025
      If the Weinmann Fan displays a < 2,7 bar alarm, indicating low oxygen pressure, the oxygen cylinder may be nearly empty (in this case change the O cylinder), the oxygen valve may be closed (in this case open oxygen valve), the pressure reducer may be defective (in this case replace pressure reducer) or there could be a kink or blockage in the oxygen hose (in this case take action to correct).
  • T
    toddlloydAug 6, 2025
    What to do if Weinmann Fan's visual alarms are flashing but there is no acoustic alarm?
    • L
      Lisa BrownAug 6, 2025
      If the visual alarms are flashing but no acoustic alarm, it may be due to a short-term electronic disruption or a defect in the electronics. Try switching the Weinmann Fan off and on again. If the error recurs, arrange for repair.
  • S
    Stephanie SchaeferAug 14, 2025
    What to do if the Weinmann Fan shows a disconnection alarm (interruption of breathing system)?
    • S
      Steven BakerAug 14, 2025
      If the Weinmann Fan shows a disconnection alarm, it could be due to a leaking or slipped ventilation hose (in this case check connections) or because the device is defective (in this case arrange for repair).
  • R
    rebecca40Aug 21, 2025
    How to fix a Weinmann MEDUMAT Standard that cannot be switched on?
    • C
      Christopher FergusonAug 21, 2025
      If the Weinmann Fan cannot be switched on, it may be defective (in this case arrange for repair) or there may be a battery failure (in this case replace both batteries).

Summary

Description of ventilator

Intended use

Outlines the specific applications and patient suitability for the MEDUMAT Standard ventilator.

Owner;operator and user qualification

Ventilation function

Explains the operational principles, air mix, and gas flow during ventilation.

Patient hose system with patient valve

Safety instructions

Safety regulations

Provides essential safety guidelines and compliance requirements for using the ventilator.

Installation

Wall mounting for STATION MEDUMAT

Connecting up the oxygen cylinder

Explains the procedure for connecting and disconnecting oxygen cylinders.

Ventilation hose

Using the ventilator

Switching on;self test

Outlines the steps for powering on the device and initiating the self-test sequence.

Selecting the ventilation settings

Explains how to configure Air Mix and No Air Mix settings for ventilation.

Respiratory frequency

Minute volume

Maximal ventilation pressure

Performing ventilation

Guides on how to perform ventilation via intubation or using a mask.

Monitoring ventilation

Emphasizes constant patient monitoring and explains the ventilation pressure gauge.

Terminating ventilation

Provides instructions on how to safely switch off the ventilator.

Alarm signals

Lists and explains the various alarm signals generated by the device.

Calculation of oxygen content;remaining operating time

Alternative ventilation procedures

Hygienic preparation

MEDUMAT Standard

Patient valve

Hose system

Cleaning, disinfecting and sterilizing

Summarizes hygiene procedures for various components in a table.

Functional checks

Obligatory checks

Lists mandatory checks required before, after use, and periodically for the device.

Check for leaks in the system

Explains how to perform a leak test on the oxygen supply system.

Checking patient hose system

Details visual inspection procedures for reusable and disposable patient hose systems.

Checking the minute volume

Check of maximal ventilation pressure

Check of alarm systems

Details how to test the Stenosis, Disconnection, and O2 pressure alarms.

Troubleshooting

Batteries

Cut-out system

Adjustment of manometer

Servicing

Intervals

Technical data

Pneumatics

O2 content when using Air Mix

Switching from Air Mix to No Air Mix

Weinmann MEDUMAT Standard Specifications

General IconGeneral
BrandWeinmann
ModelMEDUMAT Standard
CategoryFan
LanguageEnglish

Related product manuals