Installation 17
4. Installation
A permanent mounting is usually necessary only
when MEDUMAT Standard is installed as a fixture in
rescue vehicles, helicopters or aircraft. In these cases
either the STATION MEDUMAT or installation kits
are available as accessories.
If MEDUMAT Standard is supplied complete with
carrying platform, it is ready for use and requires no
further installation. Separate directions for use are
supplied with the carrying platform.
Functional tests must be carried out after installation
(note “7. Functional checks“ on page 39).
4.1 Wall mounting for STATION MEDUMAT
The wall mounting for the STATION MEDUMAT
should be installed at an appropriate place, e.g. on a
side panel inside the vehicle. Please refer to the sheet
enclosed with the STATION MEDUMAT for details of
dimensions and the installation procedure.
To place MEDUMAT Standard in the wall mounting,
first insert the slides on the underside of the ventilator
into the matching grooves in the
STATION MEDUMAT and then press the
MEDUMAT Standard inwards until the catch snaps
into the fastening at the top of the
STATION MEDUMAT.
To Next Page
Loading...
