12 Description of ventilator
Combi MODULE
The Combi MODULE enables you to apply both
oxygen inhalation and suction.
For inhalation put the switch marked
O
2
into the “I“
position. Select the desired oxygen volume by turning
the knob marked
l/min to a setting between 0 and
15 l/min. You can check this setting on the volume
manometer.
For suction put the switch marked
Vac into the “I“
position. The suction pressure is locked at -0.5 bar.
Interface MODULE
The Interface MODULE enables you to connect an
external oxygen supply at a pressure of between 2.7
and 6.0 bar to the ventilator.