WM 67841c 03/2015
WM 100 TD EN 35
4 Preparation
.
1. To open the respiratory air humidifier, grip the lower recess on
the rear of the housing and press the rear of the housing gently
with your thumb.
2. Remove the top of the humidifier.
3. If present: Pour out the water in the base of the humidifier.
4. Clean the respiratory air humidifier (see "7.4 Hygienic
preparation of the respiration hose", page69).
Material damage due to hot water and aromatic additives!
Hot water or aromatic additives (e.g., eucalyptus oil) can damage
the housing of the respiratory air humidifier and the element.
Do not fill with hot water.
Do not use any aromatic additives.
To Next Page
Loading...
Need help?
General
