Instructions for Assembly
Item number 116523-0000
We reserve the right to make technical
changes
Version 4 01.04.2014 Page 11/49
Opal Design II / Opal Design II LED
Measuring and testing tools
Tape measure
To measure the bracket position
To measure the installation height
and the width of the unit
Spirit level, rope or mason's cord To align the unit
Installation tools
Touch-up pencils
1)
For touch-up work
Pencils For tracing / marking
Test run cable To set/adjust the drive, for test runs
Protective clothing
Safety shoes To protect against falling parts
Protective gloves To protect against sharp edges on
profiles and components
1)
Supplied by weinor.
To Next Page
Loading...
