Instructions for Assembly
Item number 116523-0000
We reserve the right to make technical
changes
Version 4 01.04.2014 Page 4/49
Opal Design II / Opal Design II LED
1 Notes on assembly instructions
These instructions are geared towards trained fitters and require knowledge of installation
techniques. Awnings may only be installed by specially qualified personnel with
corresponding installation experience.
1.1 Validity of these instructions
The awnings have been approved for export and Germany.
1.2 CE mark
We, weinor GmbH & Co. KG, hereby expressly confirm that the awning complies with the
fundamental requirements and other relevant stipulations of the EN standards.
weinor GmbH & Co. KG
Mathias-Brüggen-Straße
110
50829 Cologne
(Germany)
13
EN 13 561
Awning for outdoor
use
Wind resistance class:
Class 2
To Next Page
Loading...
