3
Contents
1 General information 4
2 Safety information 5
3 Technical description 7
3.1 Permissible applications 7
3.2 Function 7
4 Installation 9
4.1 Safety information on installation 9
4.2 Delivery, transportation and storage 9
4.3 Preparation for installation 9
4.4 Burner installation 10
4.5 Valve train installation 11
4.6 Soundness test of valve train 12
4.7 Electrical connection 13
5 Commissioning and operation 14
5.1 Safety information on initial commissioning 14
5.2 Preparations for initial commissioning 14
5.3 Commissioning and setting 16
5.4 Shut down periods 20
5.5 Sequence of operation and wiring diagram 21
5.6 Operation of the W-FM10 23
6 Fault conditions and procedures for rectification 24
7 Servicing 26
7.1 Safety information on servicing 26
7.2 Servicing plan 26
7.3 Mixing head - removal and refitting 27
7.4 Mixing head - setting 27
7.5 Ignition electrode and sensor electrode setting 28
7.6 Service position of housing cover 28
7.7 Removing and refitting fan motor
and fan wheel 29
7.8 Removal and refitting of air servomotor and
air damper angle drive 29
7.9 Removing and refitting of gas butterfly valve 30
7.10 Removing and refitting air regulator housing 30
7.11 Removing and refitting coil on multifunction
assembly (W-MF...) 31
7.12 Removing and refitting gas filter on W-MF 31
7.13 Removing and refitting combustion manager 32
8 Technical Data 33
8.1 Burner equipment 33
8.2 Capacity graphs 33
8.3 Permissible fuels 33
8.4 Electrical data 33
8.5 Permissible ambient conditions 33
8.6 Dimensions 34
8.7 Valve train 35
8.8 Weights 35
Appendix
Gas throughput calculation 36
Combustion analysis 37
Notes 38
To Next Page
Loading...
Need help?
General