9
4 Installation
4.1 Safety information on installation
4.2 Delivery, transportation and storage
4.3 Preparation for assembly
Electrically isolate the plant
Prior to installation switch off the mains switch
and the safety switch.
Failure to comply could cause death or
serious injury by electric shock.
Check delivery
Check the delivery to see that it is complete and that there
has been no damage in transit. If the delivery is incomplete
or damaged, contact the supplier.
Transport
For transport weights of burners and valve trains see Ch.
8.8.
Storage
Please note the permissible ambient conditions for
storage (see Ch. 8.5).
Check burner nameplate
❏ The burner rating must be within the operating range of
the heating appliance.
The ratings given on the burner nameplate are the
minimum and maximum possible firing rates of the
burner; see capacity graphs Ch 8.2.
Space requirement
Burner and valve train dimensions see Ch. 8.6.
To Next Page
Loading...
