WEISS TM15 - Operation and Monitoring; I;O Monitoring; Monitoring Inputs and Outputs

Manual R06-2016 115 / 172
ROTARY INDEXING TABLE CONTROLLER
EF2...B
OPERATION / DESCRIPTION OF WEISS SOFTWARE | 8.5 Operation and Monitoring
8.5 Operation and Monitoring
 Access to the entire indexer configuration is only permitted for authorised persons. User name and password
are supplied with the controller (chapter 8.1.2 „Login“ on page 79).
8.5.1 I/O monitoring
In the "I/O monitoring" section, the following actions can be performed to monitor and force peripheral inputs and/or
outputs:
• Monitoring inputs and outputs
• Forcing via the "Request authority of control" button
• Forcing via the "Open separate user screen" button
8.5.1.1 Monitoring inputs and outputs
Fig. 66: Monitoring inputs and outputs
The start page of the "I/O monitoring" section shows the status of the onboard inputs and the peripheral inputs/out-
puts during operation with a higher-level controller.
This display is informative.
 To force peripheral inputs and/or outputs, it is necessary to request authority of control or to open a separate
user screen.
1.