What causes a short circuit in a WEISS TS004E Controller?
A short circuit in your WEISS Controller can be due to an overload at the 24 V outputs (output current exceeding 100 mA / 2 A), signal voltage peaks exceeding 30 V, or a supply voltage greater than 30 V.
Why is my WEISS Controller showing an overtemperature?
An overtemperature issue in your WEISS Controller could be due to the motor being too hot or the temperature switch triggering.
How to fix a position overrun on a WEISS TS004E?
The rotary indexing table or ring of your WEISS Controller may overtravel the limit position if the stop delay time is too long or the holding brake is worn. Adjusting the holding brake might be necessary.
General| Brand | WEISS |
|---|---|
| Model | TS004E |
| Category | Controller |
| Language | English |
Details the purpose and scope of the user manual.
Specifies the approved applications and operational environment for the product.
Lists impermissible uses and conditions to avoid for safe operation.
Lists all documents that are binding for the product's use and application.
Explains the classification and meaning of safety messages and hazard warnings.
Describes the hazard symbols used throughout the manual to indicate risks.
Defines the duties of parties involved in product integration and operation for safety compliance.
Specifies the required training, knowledge, and experience for personnel working with the product.
Details the requirements and procedure for activating the emergency stop function.
Provides detailed technical specifications for the Electronic Control Card.
Lists the technical specifications related to the Terminal PCB connections and functions.
Specifies the acceptable ambient temperature and humidity for product operation.
Defines the environmental limits for transporting and storing the product.
Presents the physical dimensions of the Electronic Control Card with an illustration.
Provides instructions for checking the received product for completeness and damage.
Describes the product's packaging and how it is shipped.
Outlines the procedure and precautions for safely unpacking the product.
Details the conditions and maximum duration for storing the product correctly.
Illustrates and describes the various options available for mounting the product.
Presents a schematic overview of the product's electrical connections and system integration.
Provides specific information and guidance regarding the motor cable connections.
Explains the front panel controls and status LEDs for operating and monitoring the device.
Details the function and wiring of various input terminals on the control card.
Describes the function and behavior of the output terminals on the control card.
Guides the user through the standard operating procedure in a single direction of rotation.
Explains how to operate the device for applications requiring bi-directional motor control.
Provides a guide to identify, diagnose, and resolve common errors and issues.
Offers instructions for the proper and compliant disposal of the product.
Lists contact information for WEISS service centers in various countries.
Outlines the procedure for contacting technical service and the information required.
Provides instructions and required details for ordering replacement spare parts.
Lists part numbers, designations, and quantities for available spare parts.
Directs users to resources for understanding the product's warranty terms and conditions.
To Next Page
