Electronic Control Card TS004E
Safety
2 Safety
2.1 Safety messages and hazard categories
This user manual contains safety messages to alert you to potential hazards and risks. Safety
messages in this user manual are highlighted with warning symbols and warning words.
The signal word describes the source of the hazard. The text contains instructions on how to avoid the
hazard as well as the consequence resulting from failure to follow the instructions given in the safety
message.
Depending on the severity of a hazard, the safety messages are classified according to different
hazard categories.
DANGER
DANGER indicates an immediately hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a hazardous situation, which, if not avoided, can result in death
or serious injury or equipment damage.
CAUTION
CAUTION indicates a hazardous situation, which, if not avoided, can result in injury
or equipment damage.
NOTICE
NOTICE indicates a hazardous situation, which, if not avoided, can result in
equipment damage.
In addition to the instructions and safety messages provided in this user manual, you must comply with
all directives, standards, and safety regulations applicable at the installation site of the product.
2.2 Hazard symbols
The following symbols are used in this user manual:
This is the general safety alert symbol. It alerts to injury hazards or equipment damage.
Comply with all safety instructions in conjunction with this symbol to help avoid possible
death, injury, or equipment damage.
This symbol alerts to hazardous electrical voltage. If this symbol is used in a safety mes-
sage, there is a hazard of electric shock.
6 / 29
User manual_082018_1.0_en
To Next Page
Loading...
Need help?
General
