Electronic Control Card TS004E
Packaging, transportation and storage
5 Packaging, transportation and storage
5.1 Verification of the delivery
■
Check the delivery for completeness and transportation damage upon reception.
■
In the case of damage, reject the delivery or accept it only conditionally.
■
Document the damage in the transportation documents/bill of delivery (any damage detected must
be immediately reported to the forwarding agent and confirmed by the forwarding agent).
■
Take photographs of the damage.
■
Report the damage to WEISS GmbH.
5.2 Packaging and shipment
The product is delivered in an accurately fitting
plastic packaging.
5.3 Unpacking the product
NOTICE
ELECTROSTATIC DISCHARGE
The product contains electrostatically sensitive devices that can be easily damaged
by incorrect handling.
■
Do not touch the electronic components during plugging in.
Failure to follow these instructions can result in equipment damage.
1. Do not remove the packaging until immediately prior to mounting.
2. Dispose of the packaging material in compliance with all directives, standards, and safety
regulations applicable at the installation site.
12 / 29
User manual_082018_1.0_en
To Next Page
Loading...
Need help?
General
