WEISS WAS.handling - Product Description; Device Structure

WAS.handling Windows Program 2
2 Product description
2.1 Device structure
The device is made up of the following components:
• Mechanical setup
• Drive amplifier
• Cable set
• Option: digital I/O
internal CAN Bus
Customer interface:
digital inputs
Customer interface:
digital outputs
Motor line red
Encoder line red
Drive inputs:
- Enable
(emergency shut-off)
- Quickstop
- 24V power supply
Customer interface
- Profibus or
- CAN / DeviceNet
Option:
1 or 2 digital
I/O modules
each with 16
inputs and
outputs
Motor line blue
Encoder line blue
Parameterizing via
RS232 or Ethernet
Ethernet
Power supply
Drive stroke
Z axis
Drive horizontal
Y axis